JBC930SS - ProComm Heavy Duty Stainless Steel CB Antenna Stud

If you need extra support for your antenna, this extra heavy duty stainless steel stud is what you are looking for. Whether you are an off-road maniac, a heavy equipment operator, or just a guy with a truck that wants to be ready for that low-hanging branch, this stud will stand up to the test. The top portion of the stud is a solid chunk of high quality stainless steel, threaded to receive any 3/8 x 24 antenna or accessory, including Firestik, Wilson, Francis, and more. Below this is a tough nylon washer that isolates the antenna from ground. The lower half of the stud is another solid piece of steel that provides a reliable ground for the coax. Finally, at the core of the stud is a 1/4" thick steel bolt that holds everything together. When put together, this thing is nearly indestructible.

When assembled, the stud is 2" tall and 1 1/8" in diameter. It is installed with an included wrench. It will install safely on surfaces up to 3/16" thick through a 1/2" hole. The coax connection is an SO239. It will accept any CB coax with the big PL259 connector on it.

Features

• Stainless steel
• Extra heavy duty
• SO239 coax connection
• Compatible with 3/8 x 24 threaded antennas
• 2" tall x 1 1/8" wide
• Requires 1/2" hole